HEELGUARD PATTERN DRAINS 

Made from 304 stainless steel. Our linear drains are sold in standard lengths or can be customised to size as per your requirements. Sold as a fully welded unit, our drains are the easy drop in solution for your bathroom, shower or kitchen application. 

Our linear drain bases have folds in the base to allow for water flow directly to the outlet. This excludes our DIY outlet and custom position outlet drains as they don't have folds towards the outlet, but they have a pressed V in the base but not towards any direction. 

Please note for lengths longer than 1500, the tops may be supplied in 2 pieces.

Heelguard Pattern

• Our Heelguard pattern grates are made from 3mm Wedge Wire welded with cross braces and full edge bars around the perimetre.

Our heelguard pattern is available in 70mm wide x 22mm deep, 85mm wide x 20mm deep or 100mm wide x 20mm deep

Outlet Positioning

• Our 70mm wide drains have the option of either 50.8 OD in the centre or DIY 50mm outlet supplied loose for you to cut an outlet in potion on site.
• Our 85mm wide drains have the option of either 50.8 OD in the centre, end outlet (50mm from end to centre of the hole) or DIY 50mm or 76mm outlet with flange supplied loose for you to cut an outlet in potion on site.
• Our 100mm wide drains  have the option of either 80mm OD in the centre or DIY 50mm or 76mm outlet with flange supplied loose for you to cut an outlet in potion on site. 

Custom Drains

When a standard linear grate won't work, we can modify an existing linear grate to suit your needs.

We can customise the outlet size and position based on your requirements. Please visit our custom shower grate product. 

Please check our Care Guide for Stainless Steel Products.