4322H full frame Titan Products manual hose reel with upgraded 1/2" FPT super swivel (5881) with Zerk fitting and 1/2" ID steel manifold suitable for pressure washing and non-corrosive chemicals. The 4322H is a very beefy, stackable hose reel we offer to our pressure washers. It is the perfect size to wrap up your water supply hose on for a 6 GPM and under pressure washer. This reel can be stacked with another reel of the same width on top or below using a Titan Products stack kit (TT7054).

     We offer the reel with the upgraded 1/2" FPT super swivel (5881) with a zerk fitting instead of the standard swivel CNC'ed in-house by Titan. 

      You need two reducing bushings (2578) and a street 45- high pressure (3361) plus a two-wire jump for this reel. If your pressure washer has a plug on the outlet, you need a 3/8" female socket (4630), a 3/8" female plug (4959) and a 3/8" male plug (4960) to install the jump hose to this reel.

If you are trying to choose between the full frame Titan hose reel and the U-channel series, consider the following:

• The lock is standard on this reel and all manual reels in the 4300 and full frame series. The U-channel reels (4800 series) do not offer the hose reel lock in the standard build, but a bungee cord can be wrapped around the hose to prevent unravelling down the road.
• The full frame can handle a bit more abuse and pulling hose from the sides without 'tweaking' the reel. The full frame reels can be stacked easily, and the U-channel cannot. The U-channel can be more easily mounted on the side railing of an open trailer without requiring too much fabrication while the full frame reels require a bigger support footprint. 

Please see our jump hose section or we can make a custom length.

This reel has the estimated capacity to hold the following hose inner diameter hose lengths:

• 550' of 3/8"
• 400' of 1/2"
• 300' of 5/8"

Stacked height of two reels using TT7054 is 35.5"

***Please leave a note at checkout. If no note is left, we will send either swivel.

SKU: TT4322H