Support your external brickwork from the slab out, with an angle built to carry the load and last the distance. Vincent Buda and Company's Galvanised Shelf Angles provide a continuous bearing point for external brickwork at every floor level, hot-dip galvanised to AS/NZS 4680:2006 R3. Since 1957, we have supplied builders and engineers with structural steel that performs exactly as rated.

Pre-drilled with 20mm holes at 300mm centres on one flange, ready to bolt directly to the slab edge or frame without modification. Available in three sizes to match your engineer's specification. Same-day or next-day delivery within the Sydney Metro. Courier delivery available Australia-wide.

Product Specifications

All sizes are supplied hot-dip galvanised to AS/NZS 4680:2006 R3, in 3-metre lengths with 20mm holes pre-drilled at 300mm centres on one flange.

• 125mm x 125mm x 10mm
• 150mm x 100mm x 10mm
• 150mm x 150mm x 10mm

Note: Standard length is 3 metres. Cut-to-length is not available; full lengths only.

See Product Drawings

Key Features at a Glance

• Hot-Dip Galvanised to R3: AS/NZS 4680:2006 coating for lasting corrosion resistance in exposed facade applications.
• Pre-Drilled Ready to Fix: 20mm holes at 300mm centres on one flange, no drilling required on site.
• Three Profile Sizes: 125x125, 150x100, and 150x150 at 10mm thickness to match your structural engineer's specification.
• Continuous Bearing at Every Floor Level: Transfers masonry loads back to the slab or frame, keeping your external facade independent.

Primary Applications

• Multi-Storey Residential Facades: Carrying the load of external brick veneer at each floor level in apartment and townhouse construction where brickwork cannot be self-supporting over height.
• Commercial Storefront Brickwork: Supporting decorative or structural brick above glazed shopfront systems requiring a continuous bearing point across the full facade width.
• Industrial and Warehouse Facades: Providing a corrosion-resistant bearing angle for exposed brickwork panels in high-humidity and coastal-adjacent environments.
• Basement and Slab-Edge Brickwork: Anchoring brickwork returns and lower-level facades where the structural slab terminates and masonry must be independently supported.