Key Performance Features

• Ultra-Tough Construction: The patented design features machine-contoured "ribs" that increase durability while reducing drag in the water.

• 3M Pressure-Sensitive Adhesive: Uses the legendary 3M VHB (Very High Bond) acrylic adhesive, ensuring the guard stays attached even at high speeds and in rough water.

• Sand Color Finish: A neutral, earthy tone designed to blend seamlessly with off-white, beige, or tan-colored hulls.

• UV Stabilized: The material is treated to prevent fading, cracking, or chalking under constant sun exposure.

• Lifetime Warranty: Megaware offers a lifetime warranty against wear and adhesion failure under normal use.

Technical Specifications

In The Box (The Complete Kit)

Unlike some protectors that require separate glue, the KeelGuard comes with a full installation kit:

• 1 x 8ft Sand KeelGuard (with 3M Adhesive pre-applied)

• 1 x Ultra-Prep Scuff Pad

• 1 x 3M Adhesion Promoter

• 1 x Burnishing Tool (for maximum pressure during application)

• Detailed Installation Instructions

⚠️ Critical Installation Guidelines

For a successful, permanent bond, follow these "Golden Rules":

1. Preparation is Key: The keel must be scuffed and cleaned with the provided pad to remove wax and contaminants.

2. Avoid Anti-Fouling Paint: The KeelGuard will not bond to copper-based bottom paint. It must be applied directly to the gelcoat.

3. Temperature Matters: For the best bond, install when the ambient temperature is between 18°C (65°F) and 38°C (100°F).

4. Stay Away from Rollers: Do not install the guard in a location where it will constantly rest on a trailer roller, as the pressure can eventually shear the adhesive.