• Enables analogue signals to be converted to NMEA 2000 messages
• Convert signals from up to two engines (that share a common ground) with a single EMU-1
• 6 gauge / parameter inputs
• 4 alarm inputs
• 2 additional auxiliary inputs
• 2 Tacho inputs
• Customised IP65 case
• Diagnostic LED's
• Wide power compatibility of 9 to 35 Vdc

The EMU-1 has a PC based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with making it a flexible solution for many engine makes and models. An Actisense PC to NMEA 2000 Gateway (NGT-1) is required to configure the EMU-1.

It is recommended that an NGT-1 is available for every EMU-1 installation. The NGT-1 can be used to update the firmware connect the Toolkit and display data on a PC for diagnostic and information purposes using NMEA Reader. Please visit the NGT-1 page for product details.

An optional DIN rail mounting kit is also available. The kit is suitable for use with a top hat rail type EN 50 022 or a G section rail type EN 50 035. Please order the DIN rail kit using part number: 005-DIN-KIT-1.

Benefits

• No need to change an existing engine
• Easy installation
• Easy to configure to suit the connected engine
• Connect signals from fluid level gauges (that share a common ground with the engine) to NMEA 2000
• Optional DIN rail mounting kit available
• Total engine hours are logged by the monitoring of engine Tach (RPM) input